Farmscape Details

Description

The Farmscape product range uses the Profile 6R profile and is designed to reduce the visual impact of buildings on the landscape by giving them a more natural look from new. This effect is achieved by applying a surface pigmentation to the top face of the sheet. Unlike a dense layer of gloss paint, this pigmentation allows the distinctive texture of the fibre cement substrate to show through, and gives the product a far more natural appearance than the finish traditionally available to planners and designers.

The Farmscape range consists of three carefully chosen matt colours, namely: Anthracite (grey), Serpentine (green) and Jasper (brown). Together with the subtle variations in tone inherent in any natural cementitious product, the appearance of these colours will blend with almost any landscape from the day the building is erected.


Anthracite	Serpentine	Jasper

The range of products available with the Farmscape finish has been carefully selected to provide the optimum flexibility for both building design and construction. The Farmscape product range comprises three convenient sheet lengths (1525 mm, 2440 mm and 2900 mm) from the highly successful Profile 6R portfolio, both of which are classified as non-fragile.

When Farmscape sheets are correctly installed, together with a selection from the variety of accessories available, the whole roof can be designed and installed as non-fragile.

Features of Farmscape profiled sheets

• Economically priced product for buildings that have to blend into the landscape

• Factory-applied matt finish in a choice of 3 organic colours

• Vapour-permeability stops condensation

• Non-fragile material suitable for HSG 33 applications

• Easy to install and fix

• Maintenance-free product with 30 year durability guarantee

Accessories and fittings
A selected range of mouldings is available to match Farmscape sheets. Fittings are hand moulded and will comply with the requirements laid down in BS EN 494. However, they should not be considered as loadbearing elements of building structures.


Cranked crown sheet Girth: 750 mm Roof pitches: 12¹/2°, 15° and 17¹/2°	Ventilated cranked crown sheet Girth: 750 mm Roof pitches: 12¹/2°, 15° and 17¹/2°

Two piece close fitting ridge	Two-piece ventilating ridge

Vergeline barge board Length: 2400 mm, 1800 mm and 3000 mm Wing: 300 mm	Cranked crown vergeline barge board Girth: 1300 mm Wing: 300 mm Roof pitches: 12¹/2°, 15° and 17¹/2°

Roll top barge board Length: 1525 mm, 2440 mm and 3000 mm Wing: 200 mm	Cranked crown roll top barge board Girth: 1050 mm Wing: 200 mm Roof pitches: 12¹/2°, 15° and 17¹/2°

Open protected ridge flashing Cover length: 2200 mm	Disc finial Movement joints are also available.
• close window